INTRODUCTION

 Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Our series of HDMI Converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.

The 4x2 HDMI Matrix can use four HDMI sources to connect two HDMI sinks. The matrix allows four HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors. The Matrix can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES

l Four HDMI input signals switched or split to two HDMI sink devices

l Support CEC

l Support deep color 30bit, 36bit

l Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC

l Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

l Support signal retiming

l Support input up to 15metres AWG26 HDMI standard cable length, output up to 25metres AWG26 cable length

l   Inputs can be switched with the IR remote control，also can be controlled by two buttons.

l   It can smartly jump over those input sources which are not connected.

l With the smart function of memory, it can come back to the latest status when restarted or reconnected.

l No loss of quality

l Installs in minutes

l Need DC5V/2A power supply

 The accessories with the machines lists as picture：

1、5V Power Adaptor

2、Remote

3、one pc of Manual
Power Adaptor

Remote

Physical Connection Showing Picture：

                                       Figure 1.0 Front Panel Showing Picture

The Power Status Led Light

IR: IR Receiver

Input 1- Input 4：HDMI input led status light

Output A：HDMI A output led status light

Output B：HDMI B output led status light

Switch A: HDMI A output switch button

Switch B: HDMI B output switch button

                                               Figure 1.1 rear panel showing picture

Output B：HDMI B output interface

Output A：HDMI A output interface

Input 1- Input 4：HDMI input

DC/5V: 5V DC-DC interface

Operating and Connecting：

1.          Connect one cable from each HDMI source devices into HDMI Matrix inputs.

2.          Connect one cable from each display (monitor or projector) into the HDMI Matrix   outputs.

3.          Connect 5V power supply to the HDMI 4x2 Matrix.

SPECIFICATIONS:                  LK-HDMA42          

HDMI resolution ………………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support video color format …………………………..…………….24bit/deep color 30bit,36bit

Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth…………………………………………………………………………….225MHz

Max baud rate…………………….………………….…………………………………..6.75Gbps

Input/Output TMDS signal ………….……………………………….……0.5~1.5Volts p-p(TTL)

Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)

Input cable distance..…... ………………………. ….…..≤15m AWG26 HDMI standard cable

Output cable distance……………………………….…...≤25m AWG26 HDMI standard cable

Max working current…………………………………………………………………………800mA

Power adapter format…………….…..Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A

Operating Temperature range……..…………….………………………………… (-15 to +55℃)

Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

Dimension (L x W x H)     ……………………………….………………………260x114x45 (mm)

Weight…..………………………………………………………..…….………………………1040g

IR Remote Operating Instruction

1．Firstly take off the plastic film that inserted in the rear of remote board

2．The A and B mean the HDMI A output and B output.

3．If the Signal output from A,

Only press the number key below A line. Like after you press the 2 key under A line, the signal 2 will output from A.

4．The plastic film is strongly advised to insert the rear of the remote board when the remote is not used for long time.

 Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1.    The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.

2.    All parts will be free from the strong shake, hit, fall.

3.    Touching the power adaptor with the wet hands is prohibited.

4.    Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.

5.    Pls turn the power off when the machine is not used for long time.

6.    Pls do not open the cover and do not touch the inside parts.

7.    Pls use the original factory power adaptor.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: