Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

LK10P124-1 Waterproof Dome Fiber Optical Splice Closure

LK10P124-1 Waterproof Dome Fiber Optical Splice Closure
Number: LK10P124
  • Product introduction

Type: Waterproof Dome one inlets/four outlets

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way

Weight: 3kgErect type
Material: ABS / PC

Dimension (mm): 51*22CM H*D

Cables Entry & Exit1Entry 4Exit

Cable Diameter (mm): Φ7-Φ31

Sealing Structure: Heat shrinkable Sealing

Max Capacity of Core144 cores

Environmental temperature: -40 to +85

Atmospheric pressure: 70106KPa

Insulation resistance: ≥2X104

Span-life: 30 years.

Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS

Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.

 

Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.

Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation 

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Application

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

Uses and properties

It is belonged to open structure airproof tie-in system of machine pressure.

It is used for the protective connection between two or more optical cables

Suitable for single core fiber optic cable and ribbon fiber optic cable

 

Previous
Next