INTRODUCTION

 Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.

The LK-HDMIEXDD Extender use double cat-5E or cat-6(recommended) cables up to 60 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition is very difficult because HDMI cable is very expensive and infrequent. The Extender is designed to supply for long distance transmission of high definition signal.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES

l Support 3D

l Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

l Signal transmission :Double cat-5e or cat-6(recommended) cables up to 60 meters instead

of HDMI cables are connected between TX and RX Extender.                               

l Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

l Support CEC

l Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

l LED indication: when power is supplied or device is working, LED relative to is light.

l Support up to 60 metres AWG26 cable length between extender and source & sink device

l No loss of quality

l Installs in minutes

l Need DC5V/2A power supply

 The accessories with the machines lists as picture：

1、5V Power Adaptor

   2、one pc of Manual
Power Adaptor

Physical Connection Showing Picture：

Figure 1.0 Front Panel Showing Picture

To use two cat6 to connect the sender and receiver.1 to 1,2 to 2.

Figure 1.1 the rear and side board showing picture

SOURCE: Signal Source Input.

SINK: Receiver to connect the HDTV or other display.

DC 5V: 5V DC-DC Power Adaptor Interface.

Operating and Connecting：

1.          Connect one HDMI cable up to 20 meters between source device and TX Extender

2.          Connect one HDMI cable up to 20 meters between sink device and RX Extender

3.          Connect double cat-5e or cat-6(recommended) cables up to 60 meters instead of HDMI  cables between TX and RX Extender

4.          Connect 5V power supply to the HDMICAT60RX&TX Extender

SPECIFICATIONS:                        LK-HDMIEXDD

Length of CAT-6 cable between Rx and TX…..……………….……………..Up to 60 meters

HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support audio format output...……. …………………………LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth……………………………………………………………………………165MHz

Max baud rate……………….…….………………….………….………………………4.95Gbps

Input Video signal ………….…………………………..…………………….… 0.5~1.5Volts p-p

Output DDC signal ……………………………………………………………… 5Volts p-p (TT1L)

Input/Output HDMI cable distance………….……………..≤20m AWG26 HDMI standard cable

Max working current………………………………………………………………………...800mA

Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A

Operating Temperature range……..…………….………………………………… (-15 to +55℃)

Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

Dimension (L x W x H)     ……………………………….…………………………82x44x22 (mm)

Weight…..………………………………………………………..………………………………200g

 Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1.    The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.

2.    All parts will be free from the strong shake, hit, fall.

3.    Touching the power adaptor with the wet hands is prohibited.

4.    Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.

5.    Pls turn the power off when the machine is not used for long time.

6.    Pls do not open the cover and do not touch the inside parts.

7.    Pls use the original factory power adaptor.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: